Description Aranet4 PRO CO2 Sensor
The Aranet4 sensor is a battery powered CO2 meter with additional measurements of temperature, relative humidity and atmospheric pressure.* The device is suitable for monitoring the CO2 level in indoor environments such as at home, in office or at school.
|
Measurements
|
CO2 (carbon dioxide), temperature, relative humidity, atmospheric pressure
|
|
Line of Sight Range
|
Bluetooth up to 10m/33ft
Aranet radio up to 3 km/ 1.9mi
|
|
Operating environment
|
Indoor use
|
|
Transmitter power
|
Bluetooth: -12 dBm or 4 dBm
(selectable by user)
Aranet LoRa radio: 14 dBm
|
|
Frequency
|
Depends on base station instructions
|
|
Measurement range
|
CO2 0-9999 ppm
temperature 0°C to 50°C (32°F to 122°F)
relative humidity 0% to 85% RH
atmospheric pressure 0.3 to 1.1 atm (4.4 to 16.0 psi)
|
| Measurement accuracy* |
CO2 0-2000 ppm: ±50 ppm or 3% of reading 2001-9999 ppm: ±10% of reading
temperature ±0.4°C (0.72°F)
relative humidity ±3%
atmospheric pressure ±0.001 atm |
| Sensor |
Uses the nondispersive infrared (NDIR) sensor to measure CO2 |
| CO2 measure calibration |
Automatic or manual (at 400ppm) |
| Data Transmission |
1, 2, 5, 10 minutes |
| Data Protection |
Data encryption |
| Power options |
2 AA Alkaline batteries |
| Battery life |
Up to 2 years** |
| Operating temperature |
0°C to 50°C (32°F to 122°F) |
| Operating humidity |
0% to 85% non-condensing |
| Dimensions |
70 x 70 x 24 mm/2.76″ x 2.76″ x 0.94″ |
| Weight |
104 g (3.7 oz) |
| Construction |
Polycarbonate |
| Protection class |
IP20 |
| Marking |
CE |
| Compatible base stations |
Aranet PRO (from v1.3.2) |
| Included |
2 AA Alkaline batteries |
| Part number |
TDSPC003 (EU)
TDSPC0U3 (NA)
TDSPC0R3 (RU) |
* For best accuracy, recommended operating range is 10°C to 40°C (50°F to 104°F) and 20% to 60% RH (non-condensing).
Prolonged operation beyond these ranges may result in a shift of sensor reading, with slow recovery time.
** Bluetooth pairing disabled, LoRa radio disabled, data transmission at a 10 minute interval.
Aranet4 is not impact resistant!
Do not use the device in high humidity environments (greater than 85%)!
Do not leave the device in direct sunlight!
Measurement data are displayed on power-efficient e-ink screen allowing for long battery life. Additionally the device can provide a visual and sound notifications in case the CO2 level surpasses the high concentration level of 1400 ppm (parts per million) – level typically associated with complaints of drowsiness and poor air quality.
Aranet4 uses the most precise Nondispersive infrared (NDIR) sensor technology for accurate CO₂ measurements. It has a super-efficient e-ink display that extends it’s battery life up to 2 years (2xAA).
Connect your smartphone with the Aranet4 device by using your iOS or Android app
Connect your smartphone with the Aranet4 device via, Bluetooth by using your iOS or Android app to configure the device, view historical data, set alarms and sensor reading frequency.
- Access real-time measurement data overview
- View seven day measurement history
- Set alarms and frequency of sensor readings
- View atmospheric pressure monitoring
- Access all nearby Aranet4 devices
- Do the CO2 calibration of the device
- Get access to the available firmware updates
Using Aranet4 device with the Aranet PRO base station
The Aranet PRO base station serves as a device for collecting, storing and maintaining data from all types of Aranet sensors, including Aranet4. Up to 100 sensors can be connected to a single Aranet PRO base station which has a capacity to store the measurement history up to 10 years.
